3.29 Washer system
Fig. 130: Front wiper switch
Washer system reservoir
Fig. 131: Washer system reservoir
OM 25-3503 us – Edition 4.1 * 2503_3503b330.fm
Front window
wiper
☞
Press switch 46 down
On
☞
Press switch 46 up
Off
☞
Press switch 46 to the 1st position
1st
(down)
speed
☞
Press switch 46 to the 2nd position
2nd
(down)
speed
Information!
Do not actuate the washer system with the front window folded up. Do not
actuate the washer system if the reservoir is empty, otherwise this can dam-
age the electric pump.
The tank's filler inlet is located in the engine compartment.
Information!
Add only clean faucet water!
Add a suitable cleaning agent if required.
In winter: add antifreeze for washer systems to the water.
Refer to the antifreeze instructions for further information on concentrations.
The rubber diaphragm in the non-return valve in the housing conglutinates if
stored in a dry condition over a longer period of time. In order to restore
this valve's function, moisten this non-return valve, dip it briefly in water and
then blow air through it.
Operation
➥
Front wiper is on
➥
Front wiper returns to base position
➥
Front wiper is on
➥
Pump sprays washer water on the
window
3-49