Functions Added In Multi Program 2 Mode; Differences Between Multi Program 2 Mode And Standard Mode - Sony MVS-8000 User Manual

When the [MP2 Free Re-Entry] button is On, and any of the switcher banks are
in Multi Program 2 mode, then the following restrictions apply.
If you save and recall snapshots simultaneously with more than one region
specified, the recorded state is played back in the order of precedence of
regions (M/E-1 >M/E-2 >M/E-3 >P/P). Therefore, if you save and recall
snapshots with more than one region specified, the cross-point settings may not
be recalled correctly.
To recall the snapshots correctly, press the cross-point button before recalling
the snapshots, to select a signal other than the re-entry signal, then recall the
snapshots.

Functions Added in Multi Program 2 Mode

• You can set video processing for the utility 3 bus signal.
• In the control panel and DCU GPI input settings and switcher GPI link
• A switcher GPI link can now be set also for the utility 3 bus.
• To the macro event configuration parameters and macro attachment settings,
• For cross-point button link settings, M/E-1 to M/E-3, and P/P "Sub
• Snapshot attributes can now be set independently for main and sub.
• There are additional menus for sub which can be recalled by pressing a
• You can set [MP2 Auto Correct] to On or Off in the Effect menu or Snapshot
Differences Between Multi Program 2 Mode and
Standard Mode
The differences from operation in standard mode are as follows.
Item
Keys
234
Multi Program 2
settings, the actions that can be selected now also include "Sub Cut" and
"Sub Auto Trans."
"Main & Sub" and "Sub" have been added.
Program," "Sub Preset," and "Sub Trans PGM" have been added to the link
source bus.
button twice.
menu. When this is set to On, for example, copy destination and source data
is automatically recognized as main or sub, and the data interchanged.
a)
Main
Keys 1 to 4 can be used
Sub
Keys 2 to 4 only can be
used