Table of Contents
Advertisement
Installation, Operations, Service & Maintenance
Installation
To install the replacement door:
1. Unbolt the existing (original) door
from the charger cabinet – be sure
to retain the M4 bolts as these
must be reused in step 3 below.
2. Install the replacement door by aligning the pin (circled below).
3. Install the M4 bolts and tighten them
with 1.2 Nm of torque.
Part Number 5911110 A02
Fig. 67 – M4 Bolts
Page 90 of 112
ProCore Edge
Fig. 65 – M4 Bolts
Fig. 66 –
Align the Pin
Webasto Charging Systems, Inc.
M4
Bolts
M4
Bolts
Advertisement
Table of Contents
Need help?
Do you have a question about the ProCore Edge and is the answer not in the manual?
Questions and answers