Table of Contents
Advertisement
ProCore Edge
Firmware Updates
Software Download, Software Update & Installing Software Using the Mobile
Application
Purpose: This section describes how to use the Webasto SW Updater mobile
application for iOS platforms to load firmware onto an Webasto Product over a
Bluetooth connection.
Scope: This section describes the general procedures as they apply to any Webasto
device supporting uploads over Bluetooth with the Webasto SW Updater app.
Installing the Application: To use the Webasto SW Updater app, it must first be
installed on your iOS mobile device. If it is not currently installed, do the following:
1. Tap the App Store icon on your iPhone/iPod Touch from the home screen.
2. Tap the magnifying glass to perform an app search, and type in "Webasto
Updater" to search for the Webasto SW Updater mobile app.
If you have a QR reader on your iPhone, you can also use it to read the QR
codes below to open the App Store download page for the Webasto SW
Updater and the Webasto PosiCharge ProCore App.
Special Note:
The recently updated PosiCharge ProCore and ProCore Edge Mobile
Application User Guide 24692-05-0303 is available on TechWasto.com under
Tech Docs > Charging Systems > Operations > PosiCharge Industrial Charging >
MHE > ProCore Charging Line.
Download the
Webasto SW Updater App
3. An app with this icon should appear in the results.
Webasto Charging Systems, Inc.
Installation, Operations, Service & Maintenance
Download the
PosiCharge
TM
Page 95 of 112
ProCore App
Part Number 5911110 A02
Fig. 73 –
Software App
QR Codes
Advertisement
Table of Contents
