Table of Contents
Advertisement
ProCore Edge
Firmware Update
The following hardware and software components are needed to complete the
firmware update:
• Procore Edge 15kW charger
• Procore Mobile App
• Test Laptop with Tera Term, Peak Software, and Firmware EXE. File
• Peak Can Connector
• USB-A to USB-B cable
Before starting, confirm which version of the bootloader and application firmware
are currently installed.
1.
Confirm that only power cables (up to 10) are connected to the CAN bus
ribbon cable.
•
Remove the system controller.
•
Remove the BMS.
2.
Confirm that each connected module has a unique CAN ID set on the
rotary switch.
3.
Plug the PCAN-USB adaptor into a USB port on a Windows PC.
4.
Connect the PCAN-USB adaptor to an empty Micromatch connector on
one of the power modules using the DB 9-pin-to-Micromatch adaptor.
(See images below).
Webasto Charging Systems, Inc.
Installation, Operations, Service & Maintenance
Page 109 of 112
Part Number 5911110 A02
Advertisement
Table of Contents
