Table of Contents
Advertisement
ProCore Edge
9.
Open Tera Term and select Serial, then the select the correct port in the
Port drop-down.
10. Next, select Setup, then Serial.
11. In the Serial port setup screen, use the Baud rate drop-down to change
it to 57600, then select OK.
12. In the Tera Term command window, type Etst, then type pwr=1 and
select the Enter key to power ON the UUT.
Webasto Charging Systems, Inc.
Installation, Operations, Service & Maintenance
Page 107 of 112
Part Number 5911110 A02
Advertisement
Table of Contents
