Table of Contents
Advertisement
ProCore Edge
5. In the Settings tab, select the COM port that is connected to the USB cable.
Then select Connect COM Port.
6. In the Update Firmware tab, use the Browse button to select the location of
the AVB file you want to upload.
7. Select the Update Now button – you will see a progress bar at the bottom.
The message "Upload successful" will appear at the bottom left when the
upload is completed.
8. If you see the message "Upload Failed," power cycle the charger and select
the Update Now button again immediately after.
Webasto Charging Systems, Inc.
Installation, Operations, Service & Maintenance
Fig. 36 – Update Firmware Tab
Page 63 of 112
Fig. 35 – Comm Port
Part Number 5911110 A02
Advertisement
Table of Contents
Need help?
Do you have a question about the ProCore Edge and is the answer not in the manual?
Questions and answers