Table of Contents
Advertisement
Installation, Operations, Service & Maintenance
WARNING
RISK OF FIRE
•
•
•
On 3-bay and 5-bay cabinets:
Remove the six screws on the
top panel of the charger, then
remove the panel.
M6 Screws (2021-2022)
M5 Screws (2023 and later)
On 10-bay cabinets:
Remove the six M5 screws on
the top panel of the charger
(Figure 20) with a TORX TX25,
then remove the panel.
Part Number 5911110 A02
Use the VAC input indicated above only on circuits with a
branch circuit protection in accordance with the NEC NFPA
70 to reduce the risk of fire.
These circuits (maximum CB size) also are to be consistent
with the supply current (input amps) indicated in the technical
specifications for the respective number (2–5) and voltage
(48V or 80V) of fitted modules and cabinet size (3 or 5 bays).
See pages 13-16.
Ensure that the minimum AC input wire size (AWG) indicated
in the specifications meets NEC requirements.
AC input voltage specifications are also listed on pages 13-16.
Fig. 20 – Top Panel View
Page 30 of 112
VAC Input
3-Phase 480V AC
Webasto Charging Systems, Inc.
ProCore Edge
Advertisement
Table of Contents
