Table of Contents
Advertisement
ProCore Edge
Installation, Operations, Service & Maintenance
Managing AVB Files:
You can delete a file from the file list by swiping it left – this reveals a delete
button you can press to delete the swiped file.
Selecting Target Devices:
Once an AVB file is selected, you may
enter the Select Device screen as shown
to the right.
The Selected file will appear at the top
of the screen. A list of nearby Webasto
devices with Bluetooth advertisement
signals will appear below it, along with
the signal bar strength of each.
Shown below each device name (as
set by the customer) is the version of
software currently installed. If the version
cannot be obtained, it will appear as
"?.???".
You may select and deselect as many
devices as you wish, making sure they
are the proper device type for the soft-
ware file being uploaded.
Assuming no interruptions occur, the
estimated time required to upload to
all devices is printed at the bottom of
Fig. 75 – Selecting Target Devices
the screen.
If you want to change the file to be
uploaded, use the hamburger menu in the top left corner to navigate back to the
Select File screen and make another selection.
When you are finished selecting devices, select Upload to start the upload process.
Webasto Charging Systems, Inc.
Page 97 of 112
Part Number 5911110 A02
Advertisement
Table of Contents
