Table of Contents
Advertisement
ProCore Edge
Setup Instructions
The following hardware and software components are needed to prepare for the
firmware update:
• Procore Edge 15kW charger
• Procore Mobile App
• Test Laptop with Tera Term, Peak Software, and Firmware EXE. File
• Peak Can Connector
• USB-A to USB-B cable
Setup Procedure
1.
Disconnect the J4 connector from the HMI board.
J4 Connected
Webasto Charging Systems, Inc.
Installation, Operations, Service & Maintenance
Page 103 of 112
J4 Disconnected
Part Number 5911110 A02
Advertisement
Table of Contents
