Options And Accessories; System Installation; Operation - Webasto PosiCharge DVS 300 Operation And Maintenance Manual

DVS Fast Charging System

3.1 Options and Accessories

The following options and accessories are available through your authorized Industrial
PosiCharge DVS Fast Charging System dealer. For any other replacement parts, contact
customer service directly:
Battery Monitor and Identifiers (BMID)
Many different sizes and types of industrial battery packs may be charged with the DVS Fast
Charging System. Choose the correct BMID for the nominal voltage of your pack.
24V BMID
36V – 48V BMID
72V – 80VBMID
Thermistor Options
Choose the correct thermistor type for your battery. Submersible thermistors are designed for
installation through the battery case into the battery electrolyte of flooded battery cells.
Exterior thermistors are designed to be glued onto the exterior of sealed batteries. DO NOT
submerge exterior thermistors into electrolyte, as thermistor corrosion will result in erroneous
readings.
Submersible (flooded battery) thermistor
Exterior (sealed battery) thermistor
Diagnostic Cable

4 System Installation

Refer to the DVS Installation Manual (23411-W-76) that came with your system.

5 Operation

Fast charging dramatically reduces the time to recharge a battery to a high state of charge.
Fast charging makes it possible to opportunity charge during available breaks, shift changes
and other idle time and keeps a vehicle running all day long without changing batteries. In
most two- and three-shift operations, fast charging can eliminate the need for a battery
changing room, freeing up floor space and personnel for productive activities and reducing
battery inventory by up to 65%. Fast charging also increases productivity by eliminating down
time for battery changing and avoiding low voltage operation that can reduce vehicle
performance.
23411-W-03-01
P/N 08660-W
P/N 08661-W
P/N 08662-W
Page 10 of 29
P/N 06644
P/N 06645
P/N 06969
Webasto Charging Systems, Inc.