Table of Contents
Advertisement
Installation, Operations, Service & Maintenance
There are separate tabs for 24V 36V, and 48V
(or 48V, 72V, 80V, 96V). Each battery voltage
tab must be setup individually. Generally, only
the battery capacity and battery type need to be
changed from the factory defaults.
Someone familiar with the batteries used at
the site should determine the smallest capacity
battery of each voltage that will be charged. This
capacity and battery type should be used to set
these values using the ProCore App.
For example, here the 48V tab is set to 765 Ah
and Exide Tubular Flooded. The recommended
Start Current Limit for voltage-mode charging is
25 A / 100 Ah.
DO NOT FORGET TO SAVE THE SETTINGS!!!
Part Number 5911110 A02
Page 100 of 112
ProCore Edge
Fig. 78 – Default
Battery Setup
Webasto Charging Systems, Inc.
Advertisement
Table of Contents
