Table of Contents
Advertisement
Installation, Operations, Service & Maintenance
4. Tap the GET button on the result associated with the application – the
INSTALL button will appear – tap it.
5. Enter your Apple ID password to sign in to the iTunes store to confirm your
identity when prompted. The download and installation will continue.
6. After the download and installation are complete, you can tap the OPEN
button in the Play Store listing to open the Updater app. Alternatively, the
app can be accessed by locating its icon from the home screen.
Adding the AVB File:
The firmware file to load comes in the form of a binary file with extension .AVB.
This must be received as an email attachment on your mobile device.
To add the file to the SW Updater App, touch the attachment and hold until you
see a list of app icons to select from.
Select the Webasto Updater icon.
NOTE: You may need to click the ellipsis (...) to see it.
When the app opens, you will be directed to the Device List screen with the file
you just added selected for upload. If you wish to upload this file immediately,
skip to Selecting Target Devices.
Selecting an AVB File:
If you previously added an AVB file via
email attachment, you may load it again
by opening the Webasto Updater app
directly. You will see the Select File screen
as shown to the right.
Part Number 5911110 A02
Fig. 74 – Selecting an AVB File
Page 96 of 112
ProCore Edge
Webasto Charging Systems, Inc.
Advertisement
Table of Contents
