Table of Contents
Advertisement
Installation, Operations, Service & Maintenance
4. To replace the fuse on the interface
board, gently lift it up from the small
retainers. To install a new fuse,
gently press the new fuse into the
retainers as shown to the right.
5. Installation of the user interface is the reverse order of removal.
Be sure to reconnect the two mating connectors to the interface connectors
as shown below.
Interface Board
Interface
Connectors
Part Number 5911110 A02
Fuse 3A
Mating Connectors
Fig. 72 – Interface Board
Page 94 of 112
ProCore Edge
Retainer
Retainer
Fig. 71 – Fuse
Webasto Charging Systems, Inc.
Advertisement
Table of Contents
