Table of Contents
Advertisement
ProCore Edge
Installation, Operations, Service & Maintenance
Press and hold the Start button for three seconds to change the graphical battery
display to the alternate tabular battery display (Figure 5). Repeat this step to return
the display to the graphical battery display.
Fig. 32 – Alternate Tabular Battery Display
NOTE
ProCore™ Edge starts charging automatically when you connect a vehicle. Pro-
vided you are not utilizing SB cables, you can disconnect a vehicle safely from
ProCore™ Edge even while charging. You do not need to start or stop the charge
with the following buttons.
Webasto Charging Systems, Inc.
Page 53 of 112
Part Number 5911110 A02
Advertisement
Table of Contents
