Table of Contents
Advertisement
ProCore Edge
Display
Message
(Name)
BATTERY
TEMP
(Battery over
temperature
The battery
temperature is
too high.)
Battery
Temperature
Sensor Failure
Battery Voltage
Mismatch
Battery Voltage
Reversed
BMID LOST
COMM
(BMID
Communication
is Lost)
Webasto Charging Systems, Inc.
Message
Description
type
The batter temperature is
too high (i.e., above the
battery table maximum
temperature) to charge.
A faulty battery cannot
Fault
accept a high-charge
current.
An incorrect BMID setting
is resulting in a faulty
battery overheating.
The temperature sensor
reading is out of the valid
Warning
range.
The difference between the
battery reported voltage
Fault
and corrected local voltage
exceeds 2 volts.
Positive and negative
terminals are reversed on
Fault
the battery connection.
There are damaged BMID
communication (comm)
Fault
wires in the charger output
cable or in the vehicle.
Installation, Operations, Service & Maintenance
Page 57 of 112
Action(s)
Let the battery cool before
charging.
Service the battery.
Use the ProCore App to
correct the BMID settings.
Check the battery
temperature sensor
wiring for damage.
Check for output cable
damage causing an
excessive voltage drop.
Fix the output cable
connection polarity.
Repair the wiring.
Part Number 5911110 A02
Advertisement
Table of Contents
