Snmpv3; Fujitsu Optical Interfaces - Fujitsu 1FINITY L100 User Manual

Load Configuration Operation
Limitations on Load Configuration
In this case, the new xcon-id=ABC is alphabetically smaller than the previously created fabric with xcon-
id=ABCDEF. As a result, the fabric xcon-id=ABC is executed first, but the validation fails at commit.
Important: Fujitsu recommends to prepend z and YEAR-MONTH-DAY-HR to the actual xcon-id when
the user creates the fabric.
Command:
% set fabric och-connection z-2019-12-05-13-ADD-FROM-SHELF2-C2 src-if
A.3.2

SNMPv3

In case of SNMPv3, user provisioning is present in the system. The save configuration file does not contain the
authentication and privacy passwords. The user enters the actual text password in the configuration file before
executing the load merge or load replace command.
Example:
[-|#] <user>
<username>authuser1</username>
<authentication-protocol>md5</authentication-protocol>
<authentication-password>admin12345</authentication-password>
<privacy-protocol>des</privacy-protocol>
<privacy-password>admin12345</privacy-password>
</user>
A.3.3

Fujitsu Optical Interfaces

If the user saves the configuration file in previous release, the user needs to delete <band-capability></
band-capability> and <amp-type></amp-type> from the configuration data file before the execution
of load configuration feature.
In this release both fields are moved to operation side.
Example:
<interface>
<name>ots-1/0/0/E1</name>
<type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-
type">ianaift:opticalTransport</type>
<enabled>true</enabled>
<ots xmlns="urn:fujitsu:params:xml:ns:yang:interface:ot">
<admin-status>up</admin-status>
<fiber-type>smf</fiber-type>
<degree-number>1</degree-number>
<operation-mode>ope-mode-base</operation-mode>
<amp-type>edfa</amp-type> #amplifier type need to be deleted
<band-capability>lband</band-capability> #band capability need to be
deleted
</ots>
</interface>
·
Release 19.1.1 Issue 1.1, May 2021
457
Fujitsu and Fujitsu Customer Use Only