Fujitsu 1FINITY L100 User Manual page 134

Equipment Installation
Install Power Terminal Adapter
Figure 64
Seating Adapter
Step 4
Review the position of the power terminal adapter on the blade, verifying that no gap exists between the power
terminal adapter and the blade and that the power terminal adapter is slightly below the top of the blade.
Figure 65
Correcting Power Terminal Adapter Placement
Step 5
On a flat ESD-safe surface, alternately tighten the attachment screws to secure the power terminal adapter onto
the blade, careful not to overtighten them or tighten one screw completely before the other screw.
Caution: When tightening the two screws, alternate between them; do not overtighten either screw or
tighten one completely before tightening the other.
·
Release 19.1.1 Issue 1.1, May 2021
134
Fujitsu and Fujitsu Customer Use Only