Servicing The Front Control Panel; Remove The Front Control Panel - Fujitsu SPARC Enterprise T5440 Service Manual

Servicing the Front Control Panel

The front control panel contains system status LEDs and the Power button.
This topic includes the following:
"Remove the Front Control Panel" on page 148
■
"Install the Front Control Panel" on page 149
■
Related Information
"Infrastructure Boards and Cables" on page 1
■
"Front Panel Diagram" on page 3
■
"Front Panel LEDs" on page 5
■

▼ Remove the Front Control Panel

Before you begin, complete these tasks:
Read the section,
■
Power off the server, using one of the methods described in the section,
■
Off the System" on page
"Disconnect Power Cords From the Server" on page 68
■
"Remove the Server From the Rack" on page 71
■
"Perform Electrostatic Discharge – Antistatic Prevention Measures" on page 73
■
"Remove the Top Cover" on page 73
■
"Remove a Fan Tray" on page 87
■
"Remove the Fan Tray Carriage" on page 133
■
1. Unplug the front control panel cable from J9901 on the motherboard.
2. Unplug the front control panel cable from the front I/O board.
3. Remove the two No. 2 Phillips screws.
148 SPARC Enterprise T5440 Server Service Manual • June 2011
"Safety Information" on page
67.
63.
"Powering