Table of Contents
Advertisement
Important Warnings and Cautions
Observe all warnings in the text or on equipment labels regarding high-voltage or high-temperature conditions. The following warnings
and figures apply to most Fujitsu products.
Plug-in Unit Cautions
Observe the following precautions when handling plug-in units:
■ Hold the plug-in unit only by its edges.
■ Slowly and firmly push a plug-in unit into its slot to avoid damaging the unit. Do not force the unit. A slow insertion method minimizes
power surges during installation. The longer ground connector pins ensure the ground circuit is connected first.
ESD Cautions
Units are stamped with anti-electrostatic markings (shown at right). Observe the following precautions to avoid damage from ESD:
■ Always transport and store the unit in an ESD approved shipping bag.
■ Always wear an ESD wrist strap, with a minimum 1-megohm resistance, that is connected to safety ground. Do not use a damaged
wrist strap.
ATTENTION
Figure 3
Anti-electrostatic Markings
Warnings
Fiber Warnings
Danger: Never handle exposed fiber with bare hands or touch it to
bare skin. Fiber fragments can enter the skin and are difficult to
detect and remove. Follow local safety precautions regarding fiber.
Laser Safety Precautions
1FINITY systems consist of IEC/EN 60825-1 Class 1 and Class 1M
optical interface units.
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
Avertissements de Fibre
Danger: Ne jamais manipuler une fibre exposée à mains nues et ne
jamais la faire entrer directement en contact avec une partie du
corps. Des fragments de fibre peuvent pénétrer la peau et leur
détection et extraction sont extrêmement difficile.
Avertissements Relié au Laser
Les systèmes 1FINITY contient des interfaces optiques basées sur
des lasers de IEC/EN 60825-1 Classe 1 et Classe 1M.
Advertisement
Table of Contents
