Interoperability With L130 Blade - Fujitsu 1FINITY L100 User Manual

282
ROADM Turn-Up and Operations

Interoperability with L130 Blade

7.16
Interoperability with L130 Blade
The interoperability between L100 and L130 Blades is automatic. Turn up both the L100 and L130 Blades
normally and connect the fibers between the L100 and L130 Blades. The connection between the blades is
autoprovisioned.
Note: When L100 Blade supports interoperability with L130 Release 19.1.1, the span supported between L130
and L100 Blades must be Raman amplifiers (with L160 Blade).
Note: OSNR setting must be enabled in L100 Blade to support interoperability with L130 Blade.
Note: When L100 Blade supports interoperability with L130 Blade, the OSNR setting on the L100 must be set to
enable. Otherwise, an outstanding osnrModeMismatch alarm is raised on the L100 Blade.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021