Syslog Administration - Fujitsu 1FINITY L100 User Manual

233
System Administration

Syslog Administration

6.10
Syslog Administration
The 1FINITY NEs support syslog filtering, saving syslogs to local syslog files, and sending syslogs to the remote
syslog server. The filtering can be done based on facility and severity. When the filtered syslogs are saved locally,
a maximum of four such files can be created.
Note: For more detailed syslog information, refer to 1FINITY Syslog User Guide, available on the Fujitsu Partners
website, https://partners.fnc.fujitsu.com/documentation.
Display Syslog
Command:
> request syslog-get num-of-lines <#lines> read-from-linenumber <starting-line-
number>
This command displays the contents of the syslog log .
/var/log/syslog
Clear/Reset Syslog
Command:
> request clear-syslog
This command deletes the contents of the syslog log .
/var/log/syslog
Check Local Syslog Filtering
Command:
% show syslog actions file log-file
Configure Local Syslog Filtering
Command:
% set syslog actions file log-file <log-file-name> log-selector log-facility <log-
facility-selection> severity <severity-selection>
This command captures user logon/logoff events to a local syslog file on disk.
Delete Local Syslog Filtering
Command:
% delete syslog actions file log-file <log-file-name>
Check Remote Syslog Filtering
Command:
% show syslog actions remote
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021