Install 19-Inch, 4-Post Rack Rail Kit - Fujitsu 1FINITY L100 User Manual

119
Equipment Installation

Install 19-Inch, 4-Post Rack Rail Kit

4.7

Install 19-Inch, 4-Post Rack Rail Kit

Prerequisites:
■ The 19-inch, 4-post EIA-310 compliant rack is installed according to local standards.
■ Hex-nut driver set and socket wrench set
■ Screwdriver set (including straight-slot and Phillips head)
■ Small level
Step 1
Determine the left and right bracket for installation.
Note: Each bracket is labeled left or right as shown in the following figure.
Figure 45
Left and Right Bracket Labels
Step 2
Loosen the flange screws on both the left and right brackets, as shown in the following figure.
Note: Do not completely remove the screws from the flange.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021