Equipmentinterconnectfailure - Fujitsu 1FINITY L100 User Manual

System Maintenance
Trouble Clearing
Entity Type
1GEX SFP
100ME SFP
100ME SFP
1GEBT SFP
1GEBT SFP

equipmentInterConnectFailure

Entity Type
·
Release 19.1.1 Issue 1.1, May 2021
Service
Severity Direction
Affected
critical service- n/a
affecting
Probable Cause
A 1GEX SFP module has failed.
minor non–service- n/a
affecting
Probable Cause
A 100ME SFP module has failed.
critical service- n/a
affecting
Probable Cause
A 100ME SFP module has failed.
minor non–service- n/a
affecting
Probable Cause
A 1GEBT SFP module has failed.
critical service- n/a
affecting
Probable Cause
A 1GEBT SFP module has failed.
Service
Severity Direction
Affected
major non–service- n/a
affecting
Probable Cause
A failure has occurred in the interblade
communication links that connect the
blades.
Location Description
NEND Equipment Fault: TYPE=<unit type>
Suggested Corrective Action
Replace the failed SFP module as soon as possible.
NEND Equipment Fault: TYPE=<unit type>
Suggested Corrective Action
Replace the failed SFP module as soon as possible.
NEND Equipment Fault: TYPE=<unit type>
Suggested Corrective Action
Replace the failed SFP module as soon as possible.
NEND Equipment Fault: TYPE=<unit type>
Suggested Corrective Action
Replace the failed SFP module as soon as possible.
NEND Equipment Fault: TYPE=<unit type>
Suggested Corrective Action
Replace the failed SFP module as soon as possible.
Location Description
NEND Interblade communication Link Failure:
TYPE = <unit type>
Suggested Corrective Action
1. Check for loose connectors on each interblade
communication link.
2. Check for and replace any damaged interblade
communication cables.
Fujitsu and Fujitsu Customer Use Only
303