Log On Ne Through Lmp - Fujitsu 1FINITY L100 User Manual

183
Initial System Turn Up

Log On NE Through LMP

5.7
Log On NE Through LMP
Prerequisite:
■ The NE is installed and powered up. Wait 10 minutes after powered up to log on the system.
Note: If this NE has multiple blades, log on through the Main blade LMP.
Step 1
Using a LAN cable, connect the PC to the blade connector labeled LMP. The IP address of the LMP is
192.168.1.1 /30. The PC must have an IP address of 192.168.1.2 /30.
Step 2
From the PC, open an SSH client session to the NE using the LMP IP address (192.168.1.1).
Step 3
Using an SSH client to connect, log on using factory default user credentials.
Note: Some SSH clients (for example, TeraTerm) provide an option to the user to choose an authentication
method. In such a scenario, select the Use keyboard-interactive to log in option button and click OK.
Figure 97
Use keyboard-interactive to log in Option Button
factory default username: fujitsu
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021