Front Control Panel Light Pipe Assemblies
Overview
The front control panel light pipe assemblies are mounted on each side of the hard
drive cage. You must remove the hard drive cage to access the screws that attach the
light pipe assemblies to the hard drive cage.
▼ Remove the Front Control Panel Light Pipe
Assemblies
1. Remove the hard drive cage.
See
"Remove the Hard Drive Cage" on page
2. Remove the No. 1 Phillips screws securing the front control panel light pipe
assembly to the hard drive cage.
Two screws secure the assembly to the hard drive cage in the SPARC Enterprise
■
T5140 server.
Three screws secure the assembly to the hard drive cage in the SPARC
■
Enterprise T5240 server.
Removing the Front Control Panel Light Pipe Assembly From a SPARC
FIGURE:
Enterprise T5240 Server
152.
Servicing Boards and Components
161