Fujitsu 1FINITY L100 User Manual page 392

System Maintenance
Equipment Replacement
Step 15
On a flat ESD-safe surface carefully loosen the attachment screws. Loosen the screws until they are fully
disengaged from the blade.
Figure 142
Attachment Screws
Step 16
Confirm the screws have been fully disengaged from the blade.
Caution: The blade and power terminal adapter may be damaged if the screws are not fully disengaged
from the blade.
Step 17
Slightly tilt the power terminal adapter forward away from the blade.
Figure 143
Tilting Power Terminal Adapter
·
Release 19.1.1 Issue 1.1, May 2021
392
Fujitsu and Fujitsu Customer Use Only