Fujitsu Primergy Econel 100 S2 Start Manual
Fujitsu Primergy Econel 100 S2 Start Manual

Fujitsu Primergy Econel 100 S2 Start Manual

Hide thumbs Also See for Primergy Econel 100 S2:

Advertisement

Quick Links

n PRIMERGY ECONEL 100 S2
PRIMERGY ECONEL 100 S2, which is equipped with this server, is particularly designed as the operational cycle for 8 hours per a day for
5-year-period, with relatively low access frequency in a small scale of system configuration. This model is not effective to such use for round-
the -clock operation through a year, database purpose with which frequent access occurs, and main administration purpose which requires
higher reliability. It is recommended to perform periodical data backup to prevent data loss.
n PRIMERGY ECONEL 100 S2 Manuals
Manuals for this server are stored in the PRIMERGY Startup Disc. Insert the PRIMERGY Startup Disc and click [PRIMERGY Manuals] on the
[PRIMERGY Startup Disc] screen to refer to the manuals.
The manuals can be read using Acrobat
1
Checking the items
supplied
Check the contents in the package using
the "Contents List".
If any items are missing, contact an office listed
in the "Contact Information".
3

Installing internal options

If internal options have been purchased separately, install them before installing the operating system.
If you use Custom Made Service, it is not required to install the internal options.
n Point to note before installing internal
options
When installing internal options, perform operations after
reading the following manuals.
"Chapter 6 Installing Internal Options"
"PRIMERGY Server Books"/"Supplement"
- Install the OS before installing Tape Drv DAT72 36GB
internal or Internal Data Cartridge. If you install these
options before installing the OS, the installation may end
unexpectedly.
- After installing internal options, make sure that the
location and order of installation are proper, and the
cables are properly connected.
ECONEL 100 S2
®
Reader
®
or Adobe
®
Reader
®
. When using Acrobat
®
Reader
2
Reading and understanding

"Safety Precautions"

Before using this server, be sure to read and un-
derstand the attached "Safety Precautions".
Also check it when connecting, installing internal options
and setting up this server.
n Available internal options and installation
locations
��������
������
������
���������
���������
����
�������������������
1
B7FH-5361-01EN-00
®
, use version 5.0 or later.
��������
������
�����������
����

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu Primergy Econel 100 S2

  • Page 1: Safety Precautions

    PRIMERGY ECONEL 100 S2 PRIMERGY ECONEL 100 S2, which is equipped with this server, is particularly designed as the operational cycle for 8 hours per a day for 5-year-period, with relatively low access frequency in a small scale of system configuration. This model is not effective to such use for round- the -clock operation through a year, database purpose with which frequent access occurs, and main administration purpose which requires higher reliability.
  • Page 2: Connecting Peripheral Devices

    Conditions n Restriction of installation features ■ �������������� ■ ������������������������������������������������������ �������������������� ����������������������������� ����������������������������������� �������������������� ������������������������� ������������������������� ���������������������������������������������� ���������������������������������������������� ���������������������� ���������������������� ����������������������������������������������������������� ����������������������������������������������������������� �������������������������������������℃������������℃ �������������������������������������℃������������℃ ������������������������������������������������������� ������������������������������������������������������� ������������� ������������������������ ������������ ���������������������������������������� ���������������������������������������� ���������������������������������������� ���������������������������������������� ���������������������������������������������������� ���������������������������������������������������� ������������������������������� ������������������������������� ���������������������������������������������������������� ���������������������������������������������������������� ■ �������������� ��������������������...
  • Page 3: Fastening The Power Cable

    "Chapter 7 Configuring Hardware and Utilities" Take notes of hardware configuration and setting values of BIOS Setup Utility in the "Configuration Sheets" that is available from Fujitsu PRIMERGY website (http://primergy.fujitsu.com). Turn on the peripheral devices, such as Set the hardware.
  • Page 4: Installing The Os

    Installing the OS This section explains the procedures to install the OS using ServerStart. Turn on the server and insert Click [Start now]. PRIMERGY Startup Disc immediately. Installation starts. ServerStart start up. The select-media window for 1. If a message prompts you to insert Array the configuration file appears.
  • Page 5 Turning off the power and installing optional devices Install optional devices after the OS installation. "Chapter 6 Installing Hardware Options" - After optional devices are installed, set the BIOS Check that no medium is inserted in Setup Utility as required. For details about setting the floppy disk drive or CD/DVD drive.
  • Page 6: Support And Service

    Support and Service l Information for PRIMERGY For the latest information on PRIMERGY, update modules, drivers and the software, refer to the Fujitsu PRIMERGY web- site. http://www.fujitsu.com/global/services/computing/server/ia/driver/ Regarding BIOS and firmware, contact to Fujitsu Support Office. Refer to the website below.
  • Page 7 It is the customer's responsibility to maintain backup copies in advance. In case of data loss, Fujitsu assumes no liability for data maintenance or restoration and damages that occur as a result of the data loss for any reason, except for items covered under warranty.
  • Page 8: Contact Information

    Address: 1st Floor, No.3505 Jalan Technokrat 5 63000 Cyberjaya, Selangor Darul Ehsan Malaysia For the latest information, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com). Microsoft, Windows, Windows Server are registered trademarks of the Microsoft Corporation in the USA and other countries.

Table of Contents