Power Terminal Adapter - Fujitsu 1FINITY L100 User Manual

85
Unit Description

Power Terminal Adapter

2.6
Power Terminal Adapter
The power terminal adapter is required when the L100 and L160 Blades are installed using the disaggregated
option. The power terminal adapter provides dual –48 V DC (A and B) power feeds to the blade. One power
terminal adapter is required for each blade. The following figures show front and rear views of the power
terminal adapter.
Note: The power terminal adapter is not required if the 1FINITY six-slot Housing is used.
Protection Cover
Figure 28
Front View of Power Terminal Adapter
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021