Fujitsu 1FINITY L100 User Manual page 387

387
System Maintenance
Equipment Replacement
PIU Slots
Fiber Restraint
Gate
Set Screw
Open
Closed
Figure 135
Unlatching Fiber Restraint Gate
Step 7
After opening the fiber restraint gates, carefully loosen the set screws on the left-hand and right-hand sides of
the blade, using a Phillips head screwdriver, to detach from the rack.
Note: The set screws are accessible after opening the fiber restraint gates on the left- and right-hand sides of
the blade.
Step 8
Close both fiber restraint gates after loosening the set screws and disengaging the blade from the rack.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021