Default Settings And Ip Port Information - Fujitsu 1FINITY L100 User Manual

System Administration

Default Settings and IP Port Information

6.1

Default Settings and IP Port Information

The following table lists IP port ranges for 1FINITY product management interfaces, protocols, and services.
Note: The values shown in bold are default values.
Management Interface/
Protocol/Service
SSH
Telnet
FTP
SFTP
Webserver-HTTP
Webserver-HTTPS
NETCONF/SSH
CLI
WebGUI
REST
NTP
SNMP
The following table shows default values for CLI/SSH, NETCONF, and Web server parameters.
Management Interface/
Protocol/Service
cli-ssh-port
netconf-enabled
netconf-timeout
netconf-ssh-port
webserver-http-port
webserver-timeout
webserver-http-enabled
The following table shows maximum number of individual sessions supported.
·
Release 19.1.1 Issue 1.1, May 2021
Port Range
22, 2000...65535
23
21
2000...2202...65535
80, 2000...65535
443, 2000...65535
830, 2000...65535
Uses SSH
Uses HTTP/HTTPS
Uses HTTP/HTTPS
123
161, 2000...65535
Default value
22
true
30m
830
80
30m
false
202
Fujitsu and Fujitsu Customer Use Only