Cli User Permissions; Cli Command Completion - Fujitsu 1FINITY L100 User Manual

System Administration
About CLI
Note: For 1FINITY NEs, the hostname is the value of system name. (Refer to
6.2.5

CLI User Permissions

Certain commands require Level-4 (root/superuser) permissions, for example, configuration and provisioning.
The default username and password (fujitsu/1finity) provide Level-4 permissions that allow access to all
functions on the system.
6.2.6

CLI Command Completion

Typing the full command or option name is not required for the CLI to recognize it. To display possible
completions, type the partial command followed immediately by <tab> or <space> (the latter requires the
complete-on-space option to be enabled).
If the partially typed command uniquely identifies a command, the full command name appears. Otherwise, a
list of possible completions is displayed.
Completion is disabled inside quotes. To enter an argument containing spaces, enclose it with either the
backslash (\) or double quotation mark (") character.
Command completion applies to filenames and directories. Space completion is disabled when entering a
filename.
The following examples illustrate how command completion works.
Example 1
The user enters com followed by <tab> or <space>.
Command:
> com
The system displays two possible completions.
Example:
> com
Possible completions:
commit - Confirm a pending commit
compare - Compare running configuration to another configuration or a file
·
Release 19.1.1 Issue 1.1, May 2021
System Name.)
Fujitsu and Fujitsu Customer Use Only
208