Fujitsu 1FINITY L100 User Manual page 95

Ordering Information
Installation Hardware
Table 36 (Cont.)
Accessories Equipment
Unit Name
AC00-SR31
AC00-SR41
USB Flash Drive
The following table lists power harnesses used with the L100 Blade.
Table 37
Power Harnesses
Configuration Part Number
Rack Mounted PC660-0105-T043
PC660-0105-T044
1FINITY Housing PC660-0105-T041
PC660-0105-T042
PC660-0102-T022
·
Release 19.1.1 Issue 1.1, May 2021
Part Number
FC9549SR31
FC9549SR41
PC15B-0001-B162
Description
1FINITY blade power harness (A and B feeds and
grounds), 12 AWG, 1HL, #8, 90°
1FINITY blade power harness (A and B feeds and
grounds), 12 AWG, 1HL, #8, 90°
1FINITY housing power harness (A and B feeds and
grounds), 6 AWG, 2HL, 5/8 in. CD
1FINITY housing power harness (A and B feeds and
grounds), 6 AWG, 2HL, 5/8 in. CD
1FINITY housing frame ground cable, 6 AWG, Green/
Yellow (2) 2HL lug
Description
Blade mounting bracket for installation in 23-inch, 2-post rack
Note: The blade mounting bracket is not required if the 1FINITY six-
slot Housing is used.
Adjustable Range: 127...180 mm
Blade mounting bracket for installation in 23-inch, 4-post rack
Note: The blade mounting bracket is not required if the 1FINITY six-
slot Housing is used.
Adjustable Range: 367...460 mm
USB flash drive formatted with 1FINITY encryption
Note: The USB flash drive on the Main blade to remove the
standing alarm against the secondary database. The standing alarm
remains if USB flash drive is not installed.
Note: USB flash drive is not supported for tributary blades.
95
Length
10 ft
25 ft
12 ft
25 ft
2 ft
Fujitsu and Fujitsu Customer Use Only