Fujitsu 1FINITY L100 User Manual page 161

Initial System Turn Up
Log On
Step 3
Log on to the NE using factory default user credentials.
factory default username:
factory default password:
Note: Fujitsu recommends changing the default username and password after initial login.
Step 4
If appropriate, change to CLI configure mode.
Command:
> configure
Output Example:
Entering configuration mode
[ok]
Step 5
Proceed to the procedure that required the login.
✓
This task is complete.
·
Release 19.1.1 Issue 1.1, May 2021
fujitsu
1finity
161
Fujitsu and Fujitsu Customer Use Only