To Install The Server In The Rack - Fujitsu SPARC Enterprise T1000 Installation Manual

Hide thumbs Also See for SPARC Enterprise T1000:
Table of Contents

Advertisement

e. At the front of the rack, use the spacing tool to adjust the distance between the
front ends of the rails.
The front ends of the rails do not have slots for the spacing tool. Slide the rails
sideways as needed until the sides of the spacing tool touch both rails. At this
point, the distance between the ends of the rails is 17.4 in. (442 mm).
f. Tighten the two screws to lock the rails in place.

To Install the Server in the Rack

1. Deploy the antitilt feature, if the rack is so equipped.
Caution – Deploy the antitilt feature on the rack before beginning an installation.
Chapter 2 Installing the Server
19

Advertisement

Table of Contents
loading

Table of Contents