GRAPHTEC GL2000 User Manual page 98

Setting
Misc. [DC, RH]
[RMS]
[RH]
<Logic/Pulse settings>
Setting
Logic/Pulse
[Logic]
[Pulse]
Perform Auto Zero Press right key to execute.
ADJ.
Reset Auto Zero ADJ. Press right key to execute.
RMS value operation Set numeric value.
cross value
Reads the current Press right key to execute.
voltage meas. value
Cross value reset Press right key to execute.
Burnout check Press right key to execute.
Off, Logic, Pulse
Filter Off, On
Misc. Annotation Enter text. (Max. 31 characters)
text string
Set 0 to 31 for each of red, green, blue (RGB)
waveform
color
Trace Off, On
Input Off, Revolution counts, Counts, Inst.
Filter Off, On
Slope H, L
EU Function Off, On
Meas. Value Set numeric value.
EU value Set numeric value.
Select Cur, Length, Area, Volume, Velocity, Accel, Freq, Mass, Energy,
Pressure, Flow, Temp, Strain, Brightness, Concentration; Optional
Unit The selections vary depending on the unit selected in the above.
(Enter arbitrary text: Up to 8 characters)
Arbitrary Enter text.
unit
Misc. Annotation Enter text. (Max. 31 characters)
text string
Span Set numeric value.
Set-
Lower Set numeric value.
tings
limit
Set 0 to 31 for each of red, green, blue (RGB)
waveform
color
Line 1 to 8 dots
Thickness
Setting
Trace Off, On
Pulses per 1 to 10000
revolution
CHAPTER 3 Settings and Measurement
Selections available
Selections available
3-57