GRAPHTEC GL2000 User Manual page 74

Digital display of measured value
<Analog CH/Pulse CH>
During Free running/capturing
CH number
Calculation mark
CH annotation
Active CH
CH number
Inactive CH
CH number : Measured CH number.
Calculation mark : Displayed when calculation between channels is set.
CH annotation : An annotation set to CH is displayed. When the number of annotation characters is
Measured value : Current measured value (instantaneous value) is displayed.
When an alarm triggers the measured values are highlighted in red
During replaying
Active CH
Inactive CH
Cursor A measured value : The measured value of the data pointed where cursor A is located is displayed.
Cursor B measured Value : The measured value of the data pointed where cursor B is located is displayed.
Difference value between
cursors A and B
Selected cursor
measured value
Measured value
Measured value
larger than the display area, all the character strings are displayed by scrolling to the
left.
Cursor A measured value
Cursor B measured value
Difference value between
cursors A and B
Selected cursor measured
value
: The difference of measured values between cursor A and B is displayed.
When cursor A is selected, value from B value to A is displayed, and when
cursor B is selected, value from A value to B value is displayed.
: The measured value of the data pointed to the current selected cursor is
displayed.
CHAPTER 3 Settings and Measurement
3-33