GRAPHTEC GL2000 User Manual page 155

CHAPTER 3 Settings and Measurement
(6)-5 Temperature settings
Set the items related to temperature.
Room temperature compensation
Set whether thermocouple room temperature (terminal temperature) compensation of this device is used or
not.
Setting
Internal
External
Temperature unit
Switch between °C (Celsius) and °F (Fahrenheit) units when setting the temperature.
°F (Fahrenheit) is calculated by the following formula.
°F (Fahrenheit) = °C (Celsius) x 1.8 + 32
When checking accuracy, calculate with Celcius accuracy x 1.8.
(6)-6 Background Color
Set the background colors of the waveform display area and the digital display area.
(6)-7 Start/Stop confirmation message
Set whether to display the confirmation message at start/stop.
Setting
Off
On
3-114
Room temperature compensation of this device is enabled.
(Normally you should select this.)
Set it when compensating for room temperature with external equipment.
Confirmation message is not displayed when starting/stopping.
Confirmation message is displayed when starting/stopping.
Description
Description