GRAPHTEC GL2000 User Manual page 89

CHAPTER 3 Settings and Measurement
In the "MONITOR" display during replaying, you can move the cursor of the selected XY-CH. Use the
keys to move the X-axis cursor, and use the
key key
Simple setting of RANGE/SPAN/POSITION/VERNIER
Press [SPAN/TRACE/POSITION] key to perform each setting.
XT screen
MONITOR
Digital value is display .
(Default status)
3-48
key
key
RANGE/SPAN
The RANGE/SPAN
value (waveform
amplitude) can be
changed .
keys to move the Y-axis cursor.
POSITION VERNIER
POSITION (center VERNIER (fine
position of waveform) amplitude adjustment
can be changed . of waveform) can be
changed .