Operation Modes - GRAPHTEC GL2000 User Manual

CHAPTER 3 Settings and Measurement

3 .4 Operation Modes

Check the system operation status in the "Status Message".
< Free Running >
Operation
Free Running
Capturing
Replaying while capturing
data
Replaying
Operation status transition
[REVIEW] key
The operation modes are described using the Y-T + Digital display screen.
The basic operation is the same in other screen modes.
3-52
< Capturing >
Startup status, or data is not being captured.
The data is being captured.
Data being captured is being replayed.
Captured data is being replayed.
[START/STOP] key
Capturing
When capture ends, the screen
automatically switches to the replay
screen .
[QUIT] key
Replaying while
capturing data
<Replaying while capturing data>
Description
[REVIEW] key
Free Running
[QUIT] key
[START/STOP] key
< Replaying >
Simple message display
Free Running
Free Running XY
Capturing to internal RAM
Capturing to internal memory
Capturing to SD card
Capturing to USB memory
Capturing and Replaying
Replaying from internal RAM
Replaying from internal memory
Replaying from SD card
Replaying from USB memory
Replaying
* Data cannot be replayed right after
power-on or no data has yet been
captured .