GRAPHTEC GL2000 User Manual page 152

(3) < Incoming mail server settings >
Setting
Incoming mail server Receive (POP3) Server Name
settings
POP3 port number
Time zone
POP3 encryption
The same as SMTP
POP3 user name
POP3 password
When the authentication of the send (SMTP) server is set to "POP Before SMTP", you must log in to the
POP3 server before accessing the send (SMTP) server.
Set the information to log in to POP3 server to the mail receive server.
However, only login to the receive server is performed and email will not be received.
(5)-6 Identification name
Set the identification name to be used with our application.
The identification name entered here will be displayed as the device name on the device search screen of
our application.
Set the E-mail Receive Server Name (server address).
Enter the string of up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notified from the mail provider.
Set the port number of the E-mail Receive Server.
0 to 65535
* Enter the port number notified from the mail provider.
Set the time zone.
UTC-12:00 to UTC+13:00
* This is a common setting with time zone setting of POP3 server
setting and NTP setting.
POP3 encryption
Set the encryption of POP3 server.
Off, StartTLS, Over SSL
* Set the encryption notified from the mail provider.
Set whether to use the same POP3 user name and POP3 password
as SMTP user name and SMTP password.
No, Yes
Set the user name to log in to the POP3 server.
Enter the string of up to 63 characters.
Set the password to log in to the POP3 server.
Enter the string of up to 63 characters.
CHAPTER 3 Settings and Measurement
Description
3-111