GRAPHTEC GL2000 User Manual page 117

CHAPTER 3 Settings and Measurement
(2)-9 Auto save
Set whether to automatically save the data captured to the internal RAM. This can be set only when the
internal RAM is selected as the recording destination.
Setting
Off
On
Dialog display
File menu
(2)-10 Recording destination file name (auto save)
Set the saving destination/file name when executing auto save.
This item can be set only when the recording destination is set to internal RAM and auto save is set to On.
For details of the contents, refer to (2) -11.
3-76
Auto save is not performed. Data captured to the internal RAM is lost if you turn off the power or start
the next recording.
To save the recorded data, you need to save it by pressing [FILE] key.
Auto save is performed. Data captured to the internal RAM is saved in the internal memory/SD card/
USB memory.
If you set the faster sampling interval or the number of data points is increased, the Auto Save may
not be completed even if the recording to the internal RAM is completed. In that case, you cannot
perform the next recording with the [START/STOP] key until the Auto Save is completed.
To stop automatic saving in the middle of the recording, select the "Auto Save stop" with the dialog
button when the dialog is displayed, select "Auto Save stop" from the file menu or the function key.
When execute Auto Save stop, the data up to that point is saved.
Description
Function key