GRAPHTEC GL2000 User Manual page 48

6 . Device access display (USB memory)
: USB memory is not attached.
: USB memory is attached but not being accessed.
: USB memory is accessed. Do not remove the USB memory. The POWER LED light also
flashes while the USB memory is being accessed.
Please do not remove the USB memory and do not turn off power when accessing the USB memory .
Data will be damaged, and it will not be accessable .
7 . Remote lamp
: Indicates local mode. Operations can be conducted on the device.
: Indicates remote mode. With some exceptions, operations must be conducted on a PC.
When you cancel the connection on the application software, the device automatically
rerturns to local mode. If local mode is not entered, press the [QUIT] key.
8 . Key lock display
: Not in key lock status. Normal operations are permitted.
: Key lock status. All keys are locked.
Refer to "(15) Key lock release with password" in "3.2 Key Operation" for details on the key
lock.
9 . Clock display
Displays the current date and time.
For details on date and time settings, refer to "3.5 Setting Menus" - "(6) OTHER settings".
CHAPTER 3 Settings and Measurement
3-7