GRAPHTEC GL2000 User Manual page 135

CHAPTER 3 Settings and Measurement
(4) TRIG settings
Set the trigger condition and the alarm.
Start Source
[Off]
[Level value]
[Alarm]
[External input]
[Specified
time]
Specified time
setting
Specified day
of the week
setting
[Constant time]
Certain period of time setting
3-94
Setting
Combination
Mode
Level
Alarm port
number
Time setting
range
Date
Time
Day of the week
Time
Selections available
Set the type of start trigger.
Off, Level, Alarm, External input, Specified time, Specified day of the week, Constant time
Set to Off when not using trigger.
Set the trigger signal detecting method and combination for each CH.
Level OR, Level AND, Edge OR, Edge AND
Set the level of trigger mode.
Analog: Off, H (Rising), L (Falling), Window In, Window Out
Logic: Off, H, L
Pulse: Off, H (Rising), L (Falling), Window In, Window Out
* The value in the parentheses is displayed when the Combination is set to
Edge.
Set the trigger level value. Set by numerical value.
Set the alarm output port number that generates the trigger.
1, 2, 3, 4
Set it when inputting the trigger signal from the outside.
Set the unit for repeating the trigger time.
Absolute time, Year, Month, Day, Hour, Minute
Set the trigger date.
Jan. 1, 2000 – Dec. 31, 2035
* Settable item varies depending on time setting range setting.
Set the trigger time.
0 hour 0 minute 0 second to 23 hour 59 minute 59 second
* Settable item varies depending on time setting range setting.
Set the day of the week when the trigger is generated.
Set to On or Off for Sunday to Saturday individually.
Set the trigger time.
0 hour 0 minute 0 second to 23 hour 59 minute 59 second
Set the time length of the trigger.
0 hour 0 minute 1 second to 9999 hour 59 minute 59 second