Using The Battery Pack (B-569 : Option) - GRAPHTEC GL2000 User Manual

CHAPTER 2 Checks and Preparation

2 . 1 2 Using the Battery Pack (B-569 : Option)

•
The B-569 (optional) is the only battery that can be used with this device.
•
For the driving time with the battery, refer to "4.3 Accessories/Optional Accessories"
•
The operating temperature ranges of this device with a battery pack mounted are as follows:
Running on battery
Battery being charged
When the rubber protector is attached, remove the rubber protector first.
Mounting the Battery Pack
(1) Unlock the battery cover and remove the cover.
(2) Insert the battery pack (B-569).
•
Always use two battery packs .
•
Do not use a new battery with an old battery at the same time .
•
If you are not sure about the amount of charge each battery has, use fully-charged battery packs (x 2) .
2-20
: 0 to 40°C
: 15 to 35°C (at power OFF) / 15 to 25°C (at power ON)
Lock
Battery pack