GRAPHTEC GL2000 User Manual page 147

CHAPTER 3 Settings and Measurement
Identification name
Apply Settings
3-106
Setting
Notification
settings
E-Mail Send Send (SMTP) Server Name
Server Settings
SMTP port number
Time zone
SMTP authentication method
SMTP-AUTH
POP3 server settings
SMTP user name
SMTP password
SMTP encryption
E-mail Address
Test email
Alarm Set the E-mail send when an alarm occurs.
Off, On
Low battery Set the E-mail send when the internal battery
lowers.
Off, On
Drive free space Set the E-mail send when the drive free capacity
during recording is low.
Off, On
Periodic Set the periodic notification E-mail send.
notifications Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours,
Specified time
* Set the specified time to the hour : minute :
second.
Set the E-mail Send Server Name (server
address).
Enter string up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notified from the mail
provider.
Set the port number of the E-mail Send Server.
0 to 65535
* Enter the port number notified from the mail
provider.
Set time zone.
UTC-12:00 to UTC+13:00
* This is a common setting for time zone setting
with POP3 server setting and NTP setting.
Set the SMTP authentication method.
Off, POP before SMTP, SMTP-AUTH
Set the authentication method of SMTP-AUTH.
PLAIN, LOGIN, CRAM-MD5, DIGEST-MD5
Set it when POP before SMTP is selected in
SMTP authentication method.
Receive (POP3) Set the E-mail receiving server name (server
Server Name address).
Enter the string of up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notified from the mail
provider.
POP3 port Set the port number of the E-mail receiving
number server.
0 to 65535
* Enter the port number notified from the mail
provider.
Time zone Set the time zone.
UTC-12:00 to UTC+13:00
* It is common setting with the time zone setting
of SMTP server setting and NTP setting.
POP3 encryption Set the encryption of POP3 server.
Off, StartTLS, Over SSL
* Set the encryption notified from the mail
provider.
The same as Set whether to use the same POP3 user name
SMTP and POP3 password as SMTP user name and
SMTP password.
No, Yes
POP3 user name Set the user name to log in to the POP3 server.
Enter the string of up to 63 characters.
POP3 password Set the password to log in to the POP3 server.
Enter the string of up to 63 characters.
Set the user name to log in to the SMTP server.
Enter the string of up to 63 characters.
Set the password to log in to the SMTP server.
Enter the string of up to 63 characters.
Set the encryption of the SMTP server.
Off, StartTLS, Over SSL
* Set the encryption notified from the mail
provider.
Set your own E-mail address.
Enter the string up to 63 characters.
A test E-mail is sent.
Set the specified name to be used in our
application (GL980-2000_APS).
Enter the string of up to 15 characters.
Confirm TCP/IP settings and restart TCP/IP
processing.
Selection available