GRAPHTEC GL2000 User Manual page 50

13 . Internal RAM information
Displays the status of the internal RAM. The status of the block can be judged by the color of each block.
For the number of blocks, set the division number by "memory block division".
: Data was not captured. It is an empty block.
: Pre-trigger data is being captured.
: Data is being captured.
: Data capture is completed but auto save is not performed.
: Data capture is completed. Auto save has been performed.
: Auto save is performed. The auto save progress is indicated by a dark green bar.
: The yellow line at the top of the block indicates that this device is capturing.
: The yellow line at the top of the block indicates the block scheduled to be captured next
time.
14 . Alarm display
Displays the alarm output status.
The number with which an alarm went off is displayed in red. The channel with the alarm threshold has a red
input value in the digital display area.
15 . Level bar
Displays the channel signal position, trigger position and alarm range.
Trigger position
Rising Falling Win In
Stop position
Start position
Alarm range
Win Out
CHAPTER 3 Settings and Measurement
3-9