GRAPHTEC GL2000 User Manual page 146

(5) Interface settings
This menu is used to specify conditions for PC connection.
End-of-line character
USB USB ID
settings
TCP-IP TCP/IP
settings Detailed
FTP/WEB
server
settings
Email
settings
Setting
IPAddr Auto Acq.
IP Address
Sub-net mask
Port number
Gateway
DNS address
Keep Alive
Apply Settings
FTP Client
FTP server port number
WEB server port number
E-mail Send Destination
Settings settings
Set the end-of-line character for sending and
receiving the control commands.
CR + LF, CR, LF
Set the identification ID when connecting
between PC and USB.
0 to 9
Set the IP address automatic acquisition.
On, Off
Set the IP address.
0 to 255 . 0 to 255 . 0 to 255 . 0 to 255
* When the IP address is set automatically, the
automatically set IP address is displayed.
Set the subnet mask.
0 to 255 . 0 to 255 . 0 to 255 . 0 to 255
* When the IP address is set automatically, the
automatic sub-net mask is displayed.
Set the port number of the control command
server.
1024 to 65535
* This is the port number specified when
connecting our application (GL980-2000_APS).
Set the gateway.
0 to 255 . 0 to 255 . 0 to 255 . 0 to 255
* When the IP address is set automatically, the
automatic gateway address is displayed.
Set the address of the DNS server.
0 to 255 . 0 to 255 . 0 to 255 . 0 to 255
* When the IP address is set automatically, the
automatic DNS server address is displayed.
Set the forced disconnection time when no
communication is detected by the control
command server.
Off, 10 seconds, 30 seconds, 1 minute, 10
minutes, 30 minutes, 1 hour
Confirm TCP/IP settings and restart TCP/IP
processing.
Perform the FTP connection settings for backup
destination.
For details, refer to "FTP/WEB server setting".
Set the port number of the FTP server installed in
this device.
0 to 65535
Set the port number of the WEB server installed
in this device.
0 to 65535
To Set the destination (address) of the E-mail.
Enter the string of up to 63 characters.
CC1 to CC3 Set the destination of the E-mail (broadcast 1 to
3).
Enter the string of up to 63 characters.
Subject Set the subject of the E-mail.
Enter the string of up to 63 characters.
CHAPTER 3 Settings and Measurement
Selection available
3-105