GRAPHTEC GL2000 User Manual page 115

CHAPTER 3 Settings and Measurement
<Overwrite mode is On>
pattern 1
1
All eight blocks have not been recorded . All blocks are black .
This is recorded from the first block (the block with yellow line scheduled to be captured next time).
1
First to fourth blocks have been recorded .
The fifth block is being recorded now (The yellow line recording is displayed.).
1
All eight blocks have been recorded . All blocks turn green .
Next time, it is recorded from the first block (the block with yellow line scheduled to be recorded
next time) .
1
Overwriting operation is sequentially repeated, but the fifth block is not recorded because the
trigger is not established .
1
Overwriting operation is sequentially repeated and the fifth block is waiting for a trigger.
1
Overwriting operation is sequentially repeated and the fifth block is being recorded now.
pattern 2
1
Currently, all blocks are green .
If the last recorded block is the second block, it is recorded from the third block (The yellow line
recording is displayed .) .
After that, the same operation as pattern 1 starts .
3-74
2 3 4
2 3 4
Recorded
2 3 4
2 3 4
2 3 4
2 3 4
2 3 4
This is the last recorded block .
5 6 7
5 6 7
Recording Not recorded
5 6 7
5 6 7
5 6 7
5 6 7
5 6 7
8
8
8
8
8
8
8