GRAPHTEC GL2000 User Manual page 76

Set active CH
Switch between the active CH by operating the [CH SELECT] key or the
key
key
CH1 is active .
Simple setting of SPAN /POSITION/TRACE
Choose each setting by pressing the [SPAN/TRACE/POSITION] key.
CH2 is active .
Y-T screen
MONITOR
Displays digital values
(default status)
Use [CH SELECT] key or the
Change the contents of the CH selected with the
* When ALL is set, setting values for CH1 is reflected on other channels.
When CH1 is OFF, ALL cannot be set.
* When Logic CH is selected in "MONITOR" or "TRACE", use
to select individual CH of logic.
CHAPTER 3 Settings and Measurement
SPAN POSITION
Allows changing of the Allows changing of the
span value position
keys to move on the CH.
keys.
TRACE
Allows turning ON/
OFF of the waveform
display
* Data is captured even
if OFF is set .
key.
and keys
3-35